Filter
Top Products
GX3000EPage 68
10.13
NAMING THE RADIO OR SECOND STATION MIC OR HANDSET
This function allows you to change the name of the RADIO or second station
microphones. Example: “RADIO - CABIN,” “RAM1 - HELM,” “RAM2 -
FLYBRIDGE.”
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “
Unit NameUnit Name
Unit NameUnit Name
Unit Name” in the
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select the Unit
(“
RadioRadio
RadioRadio
Radio,” “
Ram1Ram1
Ram1Ram1
Ram1,”or “
Ram2Ram2
Ram2Ram2
Ram2”) to be named, then
press the
[
ENT
]
key.
5. Turn the CHANNEL selector knob to scroll through
the first letter of the channel name.
6. Press the
[
ENT
]
key to store the first letter in the name
and step to the next letter to the right.
7. Repeat step 6 and 7 until the name is complete. The
name can consist of up to twelve characters, if you
do not use all twelve characters press the
[
ENT
]
key
to move to the next space. This method can also be
used to enter a blank space in the name. To clear the
previous letter, press the
[
CLR
]
key.
8. Press and hold the
[
ENT
]
key to enter the name and
return to the “
Unit NameUnit Name
Unit NameUnit Name
Unit Name” menu.
9. If you want to enter the name of another unit, repeat steps 4 through 8.
10. To exit this menu and return to radio operation mode press the
[
16/9
]
key.