Filter
Top Products
Page 77GX3000E
11.5.1 Changing GPS Information to Vessel Position or COG
Allows customising of the NAV data showing GPS Information. Factory default
is “Your Vessel’s Current Position,” however, following the steps below the GPS
Information can be changed to “Course Over Ground (COG).”
1. Press and hold down the
[
CALL
(
ENT
)]
key until “
RADIORADIO
RADIORADIO
RADIO
SETUPSETUP
SETUPSETUP
SETUP
” menu appears.
2. Press the
[
CALL
(
ENT
)]
key, then select “
NAV DISPLAYNAV DISPLAY
NAV DISPLAYNAV DISPLAY
NAV DISPLAY”
with the
[
S
]
/
[
T
]
key.
3. Press the
[
CALL
(
ENT
)]
key.
4. Press the
[
T
]
or
[
S
]
key to select “
PosPos
PosPos
Pos (Your Vessel’s Cur-
rent Position)” or “
CruCru
CruCru
Cru (Course Over Ground).”
5. Press the
[
CALL
(
ENT
)]
key to store the data entered, then
press the
[
16/9
]
key to exit this menu and return to radio
operation mode.