Filter
Top Products
Page 43GX3000E
Repeat this procedure until all nine spaces of the MMSI number are en-
tered.
11. If a mistake was made entering in the name or the MMSI number repeat
pressing the
[
H/L
(
NAV
)]
key until the wrong character is selected, then move
the channel knob to correct the entry.
12. To store the data entered, press and hold the
[
ENT
]
key.
13. To enter another individual address, repeat steps 4
through 12.
14. To exit this menu and return to radio operation mode press the
[
16/9
]
key.
NOTE
Selecting “
NextNext
NextNext
Next” or “
ExitExit
ExitExit
Exit” will automatically save the name and MMSI
number into memory.
9.5.2 Setting up Individual Reply
Allows setting up the radio to automatically (default setting) or manually re-
spond to a DSC Individual call requesting you to switch to a working channel for
voice communications. When Manual is selected the MMSI of the calling ves-
sel is shown allowing you to see who is calling. This function is similar to caller
id on a cellular phone.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select “
DSCDSC
DSCDSC
DSC
SetupSetup
SetupSetup
Setup
” menu.
3. Press the
[
ENT
]
key, then select “
INDIV ReplyINDIV Reply
INDIV ReplyINDIV Reply
INDIV Reply” with
the CHANNEL selector knob.
4. Press the
[
ENT
]
key.
5. Turn the CHANNEL selector knob to select “
AutoAuto
AutoAuto
Auto”
or “
ManualManual
ManualManual
Manual.”
6. Press the
[
ENT
]
key to store the selected setting.
7. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.