Filter
Top Products
GX3000EPage 34
8.16 VOICE SCRAMBLER
If privacy of communications is desired, a CVS2500 voice scrambler (VS) can
be installed in the transceiver. Contact your Dealer to have a CVS2500 installed.
Refer to the section 10.11 VOICE SCRAMBLER to program the voice scram-
bler.
1. Turn on the transceiver.
2. Select a channel that was programmed for scram-
bler mode (“VS” will appear on the LCD).
y If a channel is not set for the voice scrambler, the
display will be as shown in the illustration at the
right (“VS” will disappear from the LCD).
y If a voice scrambler is cancelled temporarily in the
“SETUP” menu, the display will be as shown in
the illustration at the right.
3. Monitor the channel before transmitting.
4. Transmit the voice message. The signal sent will be
scrambled.