Standard Horizon Matrix GX3000E Marine Radio User Manual


  Open as PDF
of 96
 
Page 69GX3000E
10.14 FOG ALERT TONE FREQUENCY
This selection allows you to select the Alert Tone Frequency for the PA/FOG
Operation. Available selections are “200 Hz” through “850 Hz” in 50 Hz steps.
The default Alert Tone Frequency is 400 Hz.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “
FOG Freq.FOG Freq.
FOG Freq.FOG Freq.
FOG Freq.” in the
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select desired
tone frequency.
5. Press the
[
ENT
]
key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.
10.15 RECEIVER AUDIO TONE CONTROL
Allows the treble and bass of the speaker audio to be adjusted for best listening
in noisy environments. The effect is similar to adjusting the treble and bass
controls on a stereo.
1. Press and hold down the
[
CALL
(
MENU
)]
key
until “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “
TONE CONT.TONE CONT.
TONE CONT.TONE CONT.
TONE CONT.”
in the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu with the CHAN-
NEL selector knob.
3. Press the
[
ENT
]
key, then select “
BASSBASS
BASSBASS
BASS” with
the CHANNEL selector knob.
4. Turn the CHANNEL selector knob to select de-
sired audio responce in the lower frequency
range. Available selections are “
––
––
–
66
66
6
” through “
+6+6
+6+6
+6.”
5. Press the
[
ENT
]
key to store the selected setting.
6. Select “
TREBLETREBLE
TREBLETREBLE
TREBLE” with the CHANNEL selector
knob.
7. Turn the CHANNEL selector knob to select de-
sired audio responce in the highr frequency
range. Available selections are “
––
––
–
66
66
6
” through “
+6+6
+6+6
+6.”
8. Press the
[
ENT
]
key to store the selected setting.
9. To exit this menu and return to radio operation mode press the
[
16/9
]
key.
 previous next