Filter
Top Products
Page 59GX3000E
9.10 DSC TRANSMISSION TEST
1. Press the
[
CALL
(
MENU
)]
key. The “
DSC OperationDSC Operation
DSC OperationDSC Operation
DSC Operation”
menu will appear.
2. Turn the CHANNEL selector knob to select “
DSC TestDSC Test
DSC TestDSC Test
DSC Test”
menu.
3. Press the
[
ENT
]
key, then select the station (name or
MMSI number) to be sent the test signal with the
CHANNEL selector knob.
4. Press the
[
ENT
]
key.
5. Turn the CHANNEL selector knob to select the “Indi-
vidual” you want to send the test signal or “Manual,”
then press the
[
ENT
]
key.
6. If “Manual” is selected at the previous step, enter the
MMSI number (nine digits) which you want to send
the test signal. To do this, turn the CHANNEL selec-
tor knob to scroll through numbers “0-9,” the press
the
[
ENT
]
key to move the entry location to the right.
If a mistake was made entering in the MMSI number
repeat pressing the
[
H/L
(
NAV
)]
key until the wrong
number is selected, then move the channel knob to
correct the entry. When finished entering the MMSI
number, press and hold the
[
ENT
]
key.
7. Press the
[
ENT
]
key again to transmit the Test signal.