Filter
Top Products
Page 65GX3000E
10.8 SCAN RESUME TIME
This selection is used to select the time the GX3000E waits after a transmis-
sion ends before starting scanning.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “
SCAN ResumeSCAN Resume
SCAN ResumeSCAN Resume
SCAN Resume” in
the “
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu with the CHANNEL selec-
tor knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select the de-
sired resume time. The resume time can be set to
“
1sec1sec
1sec1sec
1sec,” “
2sec2sec
2sec2sec
2sec,” “
3sec3sec
3sec3sec
3sec,” or “
OffOff
OffOff
Off.” In the “
OffOff
OffOff
Off” selec-
tion, the scanner will resume after the other station
stops transmitting (carrier drops).
5. Press the
[
ENT
]
key to store the selected setting.
6. To exit this menu and return to radio operation mode press the
[
16/9
]
key.
10.9 KEY BEEP
(
ON/OFF
)
This selection allows the key beep to be turned off.
1. Press and hold down the
[
CALL
(
MENU
)]
key until
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu appears.
2. Press the
[
ENT
]
key, then select “
Key BeepKey Beep
Key BeepKey Beep
Key Beep” in the
“
Radio SetupRadio Setup
Radio SetupRadio Setup
Radio Setup” menu with the CHANNEL selector
knob.
3. Press the
[
ENT
]
key.
4. Turn the CHANNEL selector knob to select “
OnOn
OnOn
On” or
“
OffOff
OffOff
Off.”
5. Press the
[
ENT
]
key to set the key beep condition.
6. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.
NOTE
Emergency alarm and beeps for DSC operation cannot be turned OFF.