Filter
Top Products
14
TASCAM DR-100MKII
2 – Names and Functions of Parts
Left side panel
g HOLD switch
Shift to the left end (in the direction of the arrow) to
engage the hold function.
All buttons are inoperative when hold is ON.
h /SP OUTPUT volume control
Use to adjust the volume output from the built in
speaker or
jack.
j jack
Use to connect headphones. (See “Connecting
monitors and headphones” on page 25.)
k LINE OUT jack
Use a stereo mini jack cable to connect to the line input
connector on an external device.
l
LINE 2 IN jack
Use a stereo mini jack cable to connect to the line
output connector on audio equipment or other
external device.
; USB port
Connect to a computer using the included USB cable.
(See “7 – Connecting with a Computer” on page 47.)
NOTE
Always connect the recorder directly to a computer. Do not
use a USB hub.
z DC IN 5V connector
Connect a PS-P520 AC adaptor or BP-6AA battery pack
(both sold separately).
x
button
Press and hold to turn the power ON and OFF.
Right side panel
c REMOTE/DIGITAL IN jack
Connect the included TASCAM RC-10 wired remote
control or a TASCAM RC-3F footswitch (sold separately)
here. You can use the remote control to operate the
unit, including stopping and starting playback. (See “9
– Using the REMOTE/DIGITAL IN jack” on page 52.) In
addition, you can input a digital signal by connecting
the included digital input conversion cable. (See “Using
digital input” on page 52.)
v
Battery compartment (specialized lithium ion
battery)
Compartment for the unit’s dedicated lithium ion
battery. (See “Using the lithium ion battery” on page
20.)
b
INPUT knob
Adjusts the input volume.
Bottom panel
n
MIC GAIN switch
Set the sensitivity of the mic input.