Filter
Top Products
52
TASCAM DR-100MKII
This unit has a REMOTE/DIGITAL IN jack to which you can
connect a TASCAM RC-10 wired remote control or TASCAM
RC-3F footswitch-type remote control (sold separately) that
can be used to operate the unit.
You can also use the included digital input conversion
cable to connect the recorder to external digital audio
equipment.
Footswitch (TASCAM RC-3F, sold
separately)
TASCAM RC-3F
Footswitch (sold separately)
Setting footswitch operation
Use the
REMOTE/DIGI IN
setting screen to make footswitch
settings.
1 Press the MENU button to open the
MENU
screen.
2 Use the wheel to select
REMOTE/DIGI IN
, and press
the ENTER/MARK to open the
REMOTE/DIGI IN
submenu.
3 Use the wheel to select
FUNCTION
menu item, and
press the ENTER/MARK or / button.
4 Use the wheel to to change the
FUNCTION
item to
RC-
3F
. (Default:
RC-10
).
5 Use the . and wheel to select
MODE
item, and
press the ENTER/MARK or / button.
6 Use the wheel to change the
MODE
item.
Options:
PLAY
(default),
RECORD1
,
RECORD2
,
MINUTES
MODE
FOOT SW
L C R
PLAY REW PLAY/STOP FWD
RECORD 1 STOP REC/PAUSE INC
RECORD 2
STOP REC/PAUSE MARK
MINUTES REW PLAY/STOP SPEED CHANGE
7 Press
the
STOP [8] button to return to the Home
Screen.
Using the footswitch
Press a pedal on the footswitch to operate the unit. The
function of each pedal corresponds to the assignment
shown on the
REMOTE/DIGI IN
screen.
Using digital input
Digital conversion cable (included)
Digital mixer,
Digital recorder,
Digital amplifier, etc.
Setting the digital input
Enable digital input on the
REMOTE/DIGI IN
setting screen.
1 Press the MENU button to open the
MENU
screen.
2 Use the wheel to select
REMOTE/DIGI IN
and press
the ENTER/MARK button to open the
REMOTE/DIGI
IN
setting screen.
3 Use the wheel to select
FUNCTION
, and press the
ENTER/MARK or / button.
4 Use the wheel to set
FUNCTION
to
DIGI IN
(default
value:
RC-10
).
5 After completing the setting, press the HOME button
to return to the Home Screen.
9 – Using the REMOTE/DIGITAL IN jack