A SERVICE OF

logo

3. wait
will appear on the display
for a few moments. Then,
4.
apply
sample
appears on the display, and
remains for five minutes or
until you apply blood to the
Test Spot on the Test Strip.
Step 3:
Apply
blood
sample
1. With the
Test Strip
in the
Meter and
apply
sample
on the display, apply a drop
of blood to the Test Spot. To
learn how to obtain a drop
of blood, see Chapter 5,
Getting a Drop of Blood.
Make sure
that you:
ٗ
Apply
enough
blood to
form a
round,
shiny drop
which
covers the Test Spot
completely and stays wet
during the entire test.
ٗ
Do not move the Test
Strip as you are applying
blood. If the Test Strip
moves during blood
application, make sure that
Front
PAS D'ALCOOL
sample
30
LSI-97-051 OT2.bklt.C.Eg 10/8/97 3:10 PM Page 30 (1,1)