Your ONE TOUCH
®
II Meter
automatically stores up to
250 test results, the date and
time of those results, plus
an Event code, if selected.
The Meter will not display
correct date and time until
you set the clock. (Refer to
the chart Setting Date and
Time in Chapter 9.)
Test results can be deleted
from the memory by using a
data management system.
When you have done more
than 250 tests, the oldest
test is dropped from the
memory as a new one is
added. The most recent test
result appears first.
To recall
test results:
1. Press the
On/Off
Button.
2. After
code
and
insert
strip
appear on
the display,
press the
“M” Button at the top of the
Meter.
strip
• 62 •
10. RECALLING TESTS FROM METER MEMORY
LSI-97-051 OT2.bklt.C.Eg 10/8/97 3:10 PM Page 62 (1,1)
