nodata
appears if you press the
Memory M Button when
there are no results stored.
not ok
appears when there is an
electronic problem with
your Meter. Call the
LifeScan Technical Service
Department.
Canada 1 800 663-5521
U.S.A. 1 800 227-8862
remove
strip
appears if you mistakenly
insert a Test Strip before
you turn the Meter on.
Remove the Strip and wait
until the Meter display says
insert strip. (See Chapter
6, Testing Your Blood.)
reset
code
appears if the Meter has lost
important information
including code number,
mmol/L unit setting, date,
time, and other special
functions which you may
have selected.
To reset the code number
to match your test strips,
see Chapter 4, Coding the
Meter. To reset the unit of
measurement to mmol/L,
and other special functions,
see Chapter 9, Setting Date,
Time, and Other Special
Functions. If the message
reset code appears again,
contact LifeScan Technical
Services.
• 72 •
LSI-97-051 OT2.bklt.C.Eg 10/8/97 3:10 PM Page 72 (1,1)
