Using the “M” and “C” Buttons located on top of your meter,
follow the directional arrows through the following chart.
How the Chart Works
The “M” Button advances you from one mode to the
next. For example press “M” to advance from the Beep
Mode to the Language Mode. Use the “M” button to
move
across
the page.
The “C” Button changes settings within a mode. For
example, press “C” to change from engl. (English) to
espan. (Spanish) in the language mode. As long as you
keep pressing the “C” button, you will continue cycling
through the language settings. Use the “C” Button to
move
up and down
the page.
To hold or save a setting, press “M” while the desired setting is
on the display. For instance, to select the nobeep setting, press
“M” while the words nobeep appear in the display.
Press either button once to advance one step; press and hold to
continue advancing or to go back to the beginning.
At any time you may press the On/Off Button to hold
your selection and exit.
Note: Once a language other than English is chosen, all messages
will appear in that language.
Selecting Beeps, International
• 60 •
M M
M
To Enter... Beep Mode Language Mode
With the
Meter
turned
off, press
and hold
Press
and
release
(ON/OFF) Release
(ENGLISH)
(JAPANESE)
(SPANISH)
(RUSSIAN)
(FRENCH)
(GREEK)
(ITALIAN)
(CZECH)
(DUTCH)
(TURKISH)
(PORTUGUESE)
(HUNGARIAN)
(SWEDISH)
(POLISH)
(GERMAN)
(NORWEGIAN)
(SYMBOLIC)
(FINNISH)
(DANISH)
DISPLAYS AND
SOUNDS
DISPLAYS
C
C
LSI-97-051 OT2.bklt.C.Eg 10/8/97 3:10 PM Page 60 (1,1)
