ٗ
✔
Avoid exposing the
Meter or the Test Strips to
extremes of temperature or
humidity for extended
periods of time. For
example, avoid leaving the
Meter or Test Strips in your
car for long periods.
ٗ
✔
Never let your Meter get
wet. The Meter could be
permanently damaged if
water or other liquids get
inside it.
ٗ
✔
Do not take the Meter
apart. Sensitive compo-
nents could be damaged
and cause inaccurate
results. If you take the Meter
apart, your warranty will no
longer be in effect.
How to do a daily check
1. Look through the small
hole in Test Strip Holder to
make sure there is no lint,
dirt, or blood blocking any
part of the hole.
2. If there is anything
blocking the hole, or if the
Test Area has dirt, lint, or
blood on it, remove the Test
Strip Holder and clean the
Test Area by following the
instructions in the pages
that follow.
• 42 •
LSI-97-051 OT2.bklt.C.Eg 10/8/97 3:10 PM Page 42 (1,1)
