A SERVICE OF

logo

3. Perform a Check Strip
test by following the
instructions in Chapter 3,
Checking the System.
Cleaning the Meter
The Test Strip Holder must
be removed for a complete
cleaning:
At least once a week,
Whenever the Test Area
looks dirty, and
Whenever
clean
test
area
appears on the display.
Step 1: Remove Test Strip
Holder
1. As you hold the Meter,
place your thumbs on the
two raised dots on the Test
Strip Holder.
2. Slide the Test Strip
Holder toward you to
remove.
3. Remove the Test Strip
Holder to expose the Test
Area. You are now ready for
cleaning.
43
LSI-97-051 OT2.bklt.C.Eg 10/8/97 3:10 PM Page 43 (1,1)