Chapter 5 WAN Setup
P-2812HNU-51c User’s Guide
113
Bridge PPPoE
Frames Between
WAN and Local
Ports
Select this option to forward PPPoE packets from the WAN port to the
LAN ports and from the LAN ports to the WAN port.
In addition to the P-2812HNU-51c's built-in PPPoE client, you can
select this to allow up to ten hosts on the LAN to use PPPoE client
software on their computers to connect to the ISP via the P-2812HNU-
51c. Each host can have a separate account and a public WAN IP
address.
This is an alternative to NAT for application where NAT is not
appropriate.
Clear this if you do not need to allow hosts on the LAN to use PPPoE
client software on their computers to connect to the ISP.
This field is not available for a PPPoA connection.
Enable IGMP
Multicast Proxy
Select this check box to have the P-2812HNU-51c act as an IGMP
proxy on this connection. This allows the P-2812HNU-51c to get
subscription information and maintain a joined member list for each
multicast group. It can reduce multicast traffic significantly.
Enable MLD
Multicast Proxy
Select this check box to have the P-2812HNU-51c act as an MLD
proxy on this connection. This allows the P-2812HNU-51c to get
subscription information and maintain a joined member list for each
multicast group. It can reduce multicast traffic significantly.
Back Click this button to return to the previous screen.
Next Click this button to continue.
Table 23 WAN Configuration: PPPoE or PPPoA
LABEL DESCRIPTION
