Chapter 5 WAN Setup
P-2812HNU-51c User’s Guide
120
The following table describes the labels in this screen.
Table 28 WAN Configuration: DNS Server: PPPoE, PPPoA, IPoE or IPoA
LABEL DESCRIPTION
Select DNS
Server Interface
from available
WAN interfaces
Select this to have the P-2812HNU-51c get the DNS server addresses
from the ISP automatically.
Selected DNS
Server Interfaces
Available WAN
Interfaces
Select a WAN interface through which you want to obtain the DNS
related information.
Select a WAN interface in the Available WAN Interfaces box and
use the left-facing arrow to move it to the Selected DNS Server
Interfaces box to use that interface as the DNS server.
To remove a WAN interface from the Selected DNS Server
Interfaces box, use the righ-facing arrow.
The interface on the top of the list gets the highest priority.
Use the following
Static DNS IP
address
Select this to have the P-2812HNU-51c use the DNS server addresses
you configure manually.
Primary DNS
server
Enter the first DNS server address assigned by the ISP.
Secondary
DNS server
Enter the second DNS server address assigned by the ISP.
The following fields are available only when you configure a WAN
service with IPv6 enabled. You can only enable IPv6 for a WAN service
that uses the PPPoE or IPoE encapsulation method over the ATM or
PTM interface.
Obtain IPv6 DNS
info from a WAN
interface
Select this to have the P-2812HNU-51c get the IPv6 DNS server
addresses from the ISP automatically.
WAN Interface
selected
Select a WAN interface through which you want to obtain the IPv6
DNS related information.
Use the following
Static IPv6 DNS
address
Select this to have the P-2812HNU-51c use the IPv6 DNS server
addresses you configure manually.
Primary IPv6
DNS server
Enter the first IPv6 DNS server address assigned by the ISP.
Secondary
IPv6 DNS
server
Enter the second IPv6 DNS server address assigned by the ISP.
Back Click this button to return to the previous screen.
Next Click this button to continue.
