Chapter 21 Remote Management
P-2812HNU-51c User’s Guide
336
21.5 The Service Control Screen
Click Advanced > Remote MGMT > Service Control to open the following
screen. Use this screen to decide what services you may use to access which P-
2812HNU-51c interface.
Figure 170 Service Control
The following table describes the fields in this screen.
Table 116 Service Control
LABEL DESCRIPTION
Service Control Select Enable to turn on service control. Otherwise, select Disable.
# This is the index number of the entry.
Services This is the service you may use to access the P-2812HNU-51c.
LAN Select the Enable check box for the corresponding services that you
want to allow access to the P-2812HNU-51c from the LAN.
WAN Select the Enable check box for the corresponding services that you
want to allow access to the P-2812HNU-51c from the WAN.
Apply Click this button to save your changes back to the P-2812HNU-51c.
