Chapter 9 Voice
P-2812HNU-51c User’s Guide
231
1 When you are on the phone talking to someone (party A), press the flash key to
put the caller on hold and get a dial tone.
2 Dial a phone number directly to make another call (to party B).
3 When party B answers the second call, press the flash key to create a three-way
conversation.
4 Hang up the phone to drop the connection.
5 If you want to separate the activated three-way conference into two individual
connections (with party A on-line and party B on hold), press the flash key.
6 If you want to go back to the three-way conversation, press the flash key again.
7 If you want to separate the activated three-way conference into two individual
connections again, press the flash key. This time the party B is on-line and party A
is on hold.
9.10.2.4 Phone Functions Summary
The following table shows the key combinations you can enter on your phone’s
keypad to use certain features.
Table 69 Phone Functions Summary
ACTION FUNCTION DESCRIPTION
*98# Call transfer Transfer a call to another phone. See Section
9.10.2.2 on page 227 (Europe type) and Section
9.10.2.3 on page 229 (USA type).
*66# Call return Place a call to the last person who called you.
*95# Enable Do Not Disturb Use these to set your phone not to ring when
someone calls you, or to turn this function off.
#95# Disable Do Not Disturb
*41# Enable Call Waiting Use these to allow you to put a call on hold when
you are answering another, or to turn this function
off.
#41# Disable Call Waiting
**** IVR Use these to set up Interactive Voice Response
(IVR). IVR allows you to record custom caller ringing
tones (the sound a caller hears before you pick up
the phone) and on hold tones (the sound someone
hears when you put their call on hold).
#### Internal Call
Call the phone(s) connected to the P-2812HNU-51c.
*82 One Shot Caller Display
Call
Activate or deactivate caller ID for the next call only.
*67 One Shot Caller Hidden
Call
