P-2812HNU-51c User’s Guide
293
CHAPTER 15
Static Route
15.1 Overview
The P-2812HNU-51c usually uses the default gateway to route outbound traffic
from computers on the LAN to the Internet. To have the P-2812HNU-51c send
data to devices not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the P-2812HNU-
51c’s LAN interface. The P-2812HNU-51c routes most traffic from A to the
Internet through the P-2812HNU-51c’s default gateway (R1). You create one
static route to connect to services offered by your ISP behind router R2. You
create another static route to communicate with a separate network behind a
router R3 connected to the LAN.
Figure 149 Example of Static Routing Topology
15.1.1 What You Can Do in this Chapter
The Static Route screens let you view and configure IP static routes on the P-
2812HNU-51c (Section 15.2 on page 294).
WAN
R1
R2
A
R3
LAN
