Filter
Top Products
MODULE #1 - PROGRAM THERMISTOR TYPE, TEMPERATURE SCALE (F OR C)
AND DECIMAL POINT POSITION
Select the desired Thermistor type by pressing the “UP” or “DOWN”
button.
“tYPE” < > “400” 400 = 400 Series, 2,252 ohm
“700” 700 = Thermolinearä Series
Select the desired temperature scale by pressing the “UP” or “DOWN”
button.
“SCALE” < > “F”
“C”
Select the desired decimal point location by pressing the “UP” or
“DOWN” button.
“ dECPNt” < > “0”
“0.0”
If the totalizeroption isinstalled, the offset and slopecan beprogrammed
for various temperature probe differences. See the Offsetand Slope Display
Temperature section for more details.
Selectthedesired temperaturedisplayslope valuebypressingthe “UP”or
the “DOWN” button.
“SLOPE” < > “0.0001” to “10.0000” (ex. 1.0309)
Selectthedesiredtemperaturedisplayoffsetvaluebypressingthe“UP”or
the “DOWN” button.
“OFFSEt” < > “-999” to “9999” (ex. -17.5)
-8-
MODULE #2 - PROGRAM TEMPERATURE DISPLAY OFFSET AND SLOPE