Filter
Top Products
Cisco Support Tools 1.0 User Guide How to Use the DumpCfg Utility 167
How to Use the DumpCfg Utility
Use the DumpCfg utility to analyze records in the ICM Config_Message_Log table to
determine what actions have been performed on an ICM system, when, by whom,
and using what applications.
For use with ICM Loggers only, but can be run from any ICM component.
To Access DumpCfg from the Dashboard
To run DumpCfg from the Support Tools Dashboard:
1. Use the System Select screen to select the system (namely, PG) you want to
work with.
2. From the Dashboard menu, select Cisco Common Tools > DumpCfg.
3. In the Arguments field, enter desired arguments, as described in the Using
section below.
Note: When entering arguments, the dumpcfg command is already implied. Do
not enter it in the Arguments field.
4. Specify the command duration time or accept the default (60 seconds). This is
the amount of time the command will attempt to run before terminating.
5. If desired, check Elevate Command Priority. This ensures the command will run
regardless of the level of server activity.
6. Click the Run button.
To Access DumpCfg from a Command Line on a Node
From a command-line on an ICM Logger, you can access DumpCfg from any location
on the local physical drive. For example:
c:\>dumpcfg
d:\temp>dumpcfg
Using DumpCfg
Syntax: DumpCfg <database>[@server] <low recovery key> [high recovery
key]