Filter
Top Products
Figure 9. Removing and installing a processor/DIMM blank
1. processor/DIMM blank 2. tab on the processor/DIMM blank (4)
3. memory module socket (2) 4. heat sink retention socket (4)
Next steps
1. Install the processor and the heat sink. See Installing a processor.
2. If you are removing a processor permanently, install the processor/DIMM blank. See Installing a
processor/DIMM blank.
3. Follow the procedure listed in After working inside your system.
Installing a processor/DIMM blank
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: You must remove the processor/DIMM blank when using the two-processor configuration
or to service other components inside the system.
1. Ensure that you read the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
42