Filter
Top Products
Related Links
Installing the cooling shroud
Hard drives/SSDs
Your system upports up to two 2.5 inch SAS/SATA/PCIe SSDs or SAS /SATA hard drives and eight 1.8 inch
SATA SSDs. The hard drives/SSDs are supplied in special hot-swappable drive carriers that fit in the drive
bays and these drives connect to the system board through the hard-drive backplane board.
NOTE: Mixing of SSD/SAS/SATA hardrives is not supported.
Hard-drive/SSD bay numbering
Figure 23. Hard-drive/SSD bay numbering — 2.5 inch hard-drive/SSD system
Figure 24. SSD bay numbering — 1.8 inch SSD system
Hard drive/SSD installation guidelines
For single hard drive configuration, a hard-drive blank must be installed in the other drive bay to maintain
proper airflow.
70