Figure 28. Removing and installing a 2.5 inch hard drive/SSD in a 2.5 inch hard-drive/SSD carrier
1. screw (4) 2. hard drive/SSD
3. hard-drive/SSD carrier 4. screw hole (4)
Next steps
Install a new 2.5 inch hard drive/SSD in a 2.5 inch hard-drive/SSD carrier. See Installing a 2.5 inch hard
drive/SSD in a 2.5 inch hard-drive/SSD carrier.
Installing a 2.5 inch hard drive/SSD in a 2.5 inch hard-drive/SSD carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: You must remove the hard drive/SSD from a hard-drive/SSD carrier to replace a faulty hard
drive/SSD from a hard-drive/SSD carrier.
1. Ensure that you read the Safety instructions.
2. Keep the #1 Phillips screwdriver ready.
3. Remove a 2.5 inch hard drive/SSD from 2.5 inch hard-drive/SSD carrier. See Removing a 2.5 inch
hard drive/SSD from a 2.5 inch hard-drive/SSD carrier.
75