Filter
Top Products
Quick Start Guide
5
June 2014
Transmitter installation
Step 1: Mount the transmitter
Liquid applications
Coplanar In-Line
1. Place taps to the side of the
line.
2. Mount beside or below the
taps.
3. Mount the transmitter so
that the drain/vent valves are
oriented upward.
Gas applications
Coplanar In-Line
1. Place taps in the top or side of
the line.
2. Mount beside or above the
taps.
Steam applications
Coplanar In-Line
1. Place taps to the side of the
line.
2. Mount beside or below the
taps.
3. Fill impulse lines with water.
00825-0100-4774_RevFA.fm Page 5 Friday, June 6, 2014 2:21 PM