Filter
Top Products
41
The EU Directives are issued to standardize different national regulations of the EU Member States and to facilitate free
movement of the equipment, whose safety is ensured, in the EU territory.
Since 1996, compliance with the EMC Directive that is one of the EU Directives has been legally required. Since 1997,
compliance with the Low Voltage Directive, another EU Directive, has been also legally required. When a manufacturer
confirms its equipment to be compliant with the EMC Directive and the Low Voltage Directive, the manufacturer must declare
the conformity and affix the CE marking.
z The authorized representative in the EU
The authorized representative in the EU is shown below.
Name: Mitsubishi Electric Europe B.V.
Address: Gothaer Strasse 8, 40880 Ratingen, Germany
z Note
We declare that this drive unit, when equipped with the dedicated EMC filter, conforms with the EMC Directive in industrial
environments and affix the CE marking on the drive unit.
When using the drive unit in a residential area, take appropriate measures and ensure the conformity of the drive unit used
in the residential area.
(1) EMC Directive
We declare that this drive unit, when equipped with the EMC Directive compliant EMC filter, conforms with the EMC
Directive and affix the CE marking on the drive unit (except the single-phase 100V power supply model).
y EMC Directive: 2004/108/EC
y Standard(s): EN61800-3:2004 (Second environment / PDS Category "C3")
Note:First environment
Environment including residential buildings. Includes building directly connected without a transformer to the low
voltage power supply network which supplies power to residential buildings.
Second environment
Environment including all buildings except buildings directly connected without a transformer to the lower voltage
power supply network which supplies power to residential buildings.
z Note
∗ Set the EMC Directive compliant EMC filter to the drive unit. Insert line noise filters and ferrite cores to the power and
control cables as required.
∗ Connect the drive unit to an earthed power supply.
∗ Install a motor, the EMC Directive compliant EMC filter, and a control cable according to the instructions written in the
EMC Installation Guidelines (BCN-A21041-204). (Please contact your sales representative for the EMC Installation
Guidelines.)
∗ The cable length between the drive unit and the motor is 5m maximum.
∗ Confirm that the final integrated system with the drive unit conforms with the EMC Directive.
Appendix 1 Instructions for Compliance with the EU Directives