Filter
Top Products
Page 6
DFS-1 Manual Revised 7/95
POWERTEC Ind. Corp.©
SUMMARY OF WARRANTY AND DISCLAIMER
POWERTEC Industrial Corporation warrants the DFS-1 to be free from defects in materials and work-
manship for a period of one year from the date of shipment from the factory, or if purchased from an autho-
rized POWERTEC distributor or Original Equipment Manufacturer, not more than 18 months from the date
of shipment from the factory. Upon written notification to the factory of a possible defect in materials or
workmanship, POWERTEC will, at its sole option, repair or replace, at the factory, such defective parts as it
deems necessary to restore the unit to its original specifications.
There is no other warranty, express or implied, including fitness of purpose for the application intended.
This warranty does not cover accidental or intentional damage; physical or electrical misuse or abuse; defec-
tive or incorrect installation; effects on other equipment or caused by other equipment; attempted use outside
of specified ranges; or any other situation outside of the control of POWERTEC Industrial Corporation.
The user is responsible for the application of the DFS-1 product and the programming thereof.
This warranty does not encompass any other claims, including, but not limited to, special, incidental, or
consequential damages.
This manual has been assembled as a guide to the use of a POWERTEC product. It represents the best
efforts to compile and present the information herein. Such errors as may appear in no way affect the above
stated warranty. If mistakes of fact are found or suspected in this manual, please notify the factory or your
distributor at once.
The DFS-1 contains static sensitive parts which may be damaged by careless handling of the printed
circuit board. You can avoid this type of damage by always touching the frame of the drive before you touch
the printed circuit board or any of its connections.
The DFS-1 is supplied for field installation in a protective bag. Bring the bag into contact with the
motor controller frame before removing the board from the bag.
WARNING!