Filter
Top Products
Page 13
Revised 7/95 DFS-1 Manual
POWERTEC Ind. Corp.©
DEFAULT S ETUP
The concept behind the DFS-1 calls for fully
programmable inputs and outputs. The ability to
change analog and digital inputs and outputs at will
lends a whole new meaning to the word "flexibility".
POWERTEC has established a set of "default"
parameters which will leave the setup of the DFS-1
in a way that will operate a motor in the basic
configuration (see figure 3 on page 3 and figure 4 on
page 4). There are two good reasons for doing this:
1. This default setup allows the user to connect
and operate a motor using common, everyday
connections without having to program the DFS-1
prior to its initial use.
2. The default setup provides a baseline to
which the user can return if it appears that something
is wrong with either the user's setup or the motor
control. There is a command which allows the "reset"
of the setup to the default configuration.