Filter
Top Products
- 16 -
e. Now, you have a choice to load your master disc into a new
(empty) partition or overwrite one of the existing partitions
(if any exists, including Reserved Partition) by inputting and
modifying the name you desire; or you can simply choose
“Auto Generate” to have the system automatically generate a
partition name for you. Afterwards, simply press the UP or
DOWN arrow button to find your desired selection and press
“>>” to submit your selection. You will see the following
(unless you have chosen “Auto Generate”, then please skip to
Step “h”):
f. Now, you can name the partition you are about to load into
the Hard Drive. To enter the name, you need to use the UP or
DOWN buttons to select the character and use “>>” or “<<”
button to move the cursor position and once you’ve finished,
move the cursor to “OK” and press “>>”. For example, if you
want to name the partition for your master disc as “FUN”.
Then do the following:
Make sure the cursor is located at the first position:
i. Press “DOWN” button consecutively until “F” is
displayed.
ii. Press “>>” button once to move the cursor to the
next position.
iii. Press “DOWN” button consecutively until “U” is
displayed.
iv. Press “>>” button once to move the cursor to the
Edit Partition Name
[ ] OK?
Edit Partition Name
[x ] OK?