Filter
Top Products
- 19 -
c. The Counter Selection Menu will let you to choose how
many copies you want to make for your project. This
Counter Selection feature will allow the duplicator to count
the number of copies you’ve made and prompt you when
the desired number of copies has been made.
You can select “No Counter” if you prefer to copy continuously with
no interruption. (It will still count the number of copies, but it will
not notify you when to stop.) To select the “No Counter”, simply
press “>>” button when you see the screen above. Then skip below
and continue on to step “d”.
Or, you can select “Specify Counter” between 1 to 9999 by pressing
the UP or DOWN navigation button to the below screen:
Then please press “>>” button to submit. You shall see the screen
below:
To specify the number of copies for your project, you need to
enter/input a 4-digit number. If you are planning to specify a number
that is less than 4 digits, please fill the leading spaces with “0”s (any
leading “0” will be skipped). An example of that 4-digit number
could be “0234” (Two hundred and thirty four), or “0010” (ten).
Remember, the beginning “0”s are skipped, therefore “0010” means
“10”, which is the number 10.
Counter:
Specify Counter
Specify Counter:
[0 ] OK?