Filter
Top Products
- 21 -
ix. Then, press “>>” once to submit your counter value.
Now you shall see following screen:
If the ABOVE screen is displayed for more than 2
minutes, please check your Blank Discs for quality.
d. Please allow 5-10 seconds for the duplicator to detect your
Hard Drive partition and Blank Discs as well. After your
Hard Drive partition and Blank Discs have been recognized,
then you shall see the following screen:
By default, the “Auto Start” setting is set to “Auto”.
For example, if your duplicator has detected 3 blank
discs and didn’t detect any additional blank discs for 30
seconds, then the duplication will be started
automatically.
Preparing...
Waiting for Blanks
Preparing...
7 Disc Detected, Go?
*The “7” indicates there are 7 discs that were
recognized by the recording tray. Actual quantity
may be different depend on your machine.