Filter
Top Products
- 5 -
Tutorial Guide:
I. Make Disc-to-Disc Copies
This process will copy your master disc into several blank discs
simultaneously. However, due to its simultaneous nature, a good
conditioned master disc and lower recording speed is necessary
for high success rate and good quality duplications.
When you turn on your duplicator, after it has booted up, you
should see the following signifying your duplicator is ready.
1. Make sure the Master Reading Source is set to the 1
st
Tray (Reading Tray).
It is very important to make sure that your current Master
Reading Source is the top tray in order to avoid unnecessary
error messages. To check the Master Reading Source, please
do the following:
a. Use UP or DOWN arrow buttons to navigate to the
following screen.
b. Press “>>” to enter Select Source Menu and you shall
see the following:
DUPLICATOR 1.00
1. COPY
DUPLICATOR 1.00
8. Select Source
Drive 1 Port 1.0
Pioneer DVD-ROM