A SERVICE OF

logo

LAN Configuration
124
ProSecure Unified Threat Management (UTM) Appliance
Figure 65.
3. Enter the settings as explained in the following table:
Table 25. RIP Configuration screen settings
Setting Description
RIP
RIP Direction From the RIP Direction drop-down list, select the direction in which the UTM sends
and receives RIP packets:
None. The UTM neither advertises its route table, nor accepts any RIP
packets from other routers. This effectively disables RIP, and is the default
setting.
In Only. The UTM accepts RIP information from other routers but does not
advertise its routing table.
Out Only. The UTM advertises its routing table but does not accept RIP
information from other routers.
Both. The UTM advertises its routing table and also processes RIP
information received from other routers.