Filter
Top Products
AXIS 700
User’s Manual Section 2: Basic Installation
17
During the self test, this message will appear on the display:
where
x.xx
is the software version number.
Assigning an Internet Address
To establish communication with the TCP/IP environment, you must
assign an Internet address and optionally make up a unique host name
for your AXIS 700. The Internet address can be set from the AXIS
700 control panel, or using any of the conventional methods: DHCP,
ARP, RARP or BOOTP. Choose your preferred method.
On Windows NT networks, DHCP is the recommended method
since it allows a number of parameters to be set automatically,
provided the DHCP server has been configured to do so.
On Macintosh networks, you must use the control panel.
Refer to “Other Methods for Downloading the Internet Address” on page
19 for more information on the DHCP, ARP, RARP and BOOTP
methods.
Control Panel
To set the Internet address from the control panel, follow these steps:
1. Acquire an unused Internet address from your Network
Administrator.
2. Power up the AXIS 700. Press Menu when this display appears:
3. After a few seconds this display will be shown: