Filter
Top Products
AXIS 700
User’s Manual Appendix B: The Parameter List
65
SystemContact = Optional entry which should be in plain text and may be
used to show the name of the system contact person.
SystemName = Optional entry which should be in plain text and may be
used to show the name of the system.
SystemLocation = Optional entry which should be in plain text and may be
used to show the location of the system.
AuthenticationTrap = disabled Enables or disables the SNMP authentication failure
traps. It corresponds to the snmpenableAuthenTraps
(MIB-II) SNMP object.
[Clients]
InformationLevel = Basic Specifies the default amount of information to be
transmitted with a scanned image. If not set for a
destination, this setting will be used. Valid values are
Nothing, Basic or Complete. Basic includes information
about the AXIS 700, the connected scanner, the
parameter settings used when scanning etc. Complete
also includes the image-related profile settings.
FTPDefaultUser = anonymous If not set for a destination, this username will be used.
FTPDefaultPassword = AXIS_700@any.com If not set for a destination, this password will be used.
This field can also contain the identity of the user
transmitting the scanned image. This is useful for
administrative purposes.
FTPDefaultFileName = img%3i.%e If no file name has been assigned to the transmitted file,
this name will be used. In the default file name,
img%3i.%e, %3i means a 3-digit number and %e means
the file extension, e.g. img001.tif
SMTPMailServer = Specifies the name or Internet address of the server that
provides the e-mail facilities.
SMTPReplyAddress = Specifies the e-mail address of the person responsible
for the administration of the AXIS 700.
SMTPSubject = A scanned image Specifies the text that will appear on the Subject line of
the e-mail containing the scanned image.
URL FTP Server = Specifies the Internet address of the FTP server on
which the scanned image will be stored.
URL FTP User = Specifies the user name for logging on the the FTP
server.
URL FTP Password = Specifies the password for logging on to the FTP server
URL Directory = Specifies the directory on the FTP server where the
image will be stored.
URL = Specifies an external URL to the specified directory, e.g.
http://www.company.com/documents/filename or
ftp://ftp.company.com/documents/filename
. This could be
necessary when scanning to destinations outside your
own company. If left blank, the URL will be constructed
from the other fields.
Parameter name Value Description