Filter
Top Products
:
AXIS 700 User’s Manual
60
Displaying the Log File
The AXIS 700 log file automatically logs all events and errors that
have occurred since the last restart. You can access the log file using
one of these methods:
• Control panel
• Web browser
Control Panel
Follow these steps to display the log file from the control panel:
1. Press Menu a few times, until you reach the Advanced
menu.
2. Use to find the Server log option.
3. Press Enter to enter the submenu.
4. Use to scroll through the messages.
Write error on:
<server address>
Insufficient access rights to the directory specified for the
file destination.
No info file on:
<server address>
The information file could not be stored on the FTP
server. Possible reasons are lack of memory or naming
conflicts. The image file will be removed.
Paper jam
Paper jam in the scanner. Remove paper to continue
scanning.
No paper in scanner
No paper in the sheetfeeder. Applies to scanners without
a flatbed only.
Scanner warming up
The scanner lamp must reach the correct temperature
and intensity.
Scanner not ready
The scanner is busy. Please try again. If the error occurs
repeatedly, contact your scanner supplier.
Scanner not
connected
Please check the scanner connection and try again.
Scanner not supported
The attached scanner is not supported. Scanning will not
work properly.
Scanning failed
An error occurred during scanning. Please refer to earlier
messages.
Device is busy Please try again later.
Message Description