Filter
Top Products
Section 2: Basic Installation
AXIS 700 User’s Manual
18
4. Press Enter to edit the Internet address:
5. Press Menu to move through the digits and highlight each
digit, one at a time.
6. Use to increase or decrease each highlighted digit, as
required.
7. Press Enter to confirm the changes.
8. Press Menu to display the default router address:
9. Press Enter to edit the default router address:
10. To change the value, repeat steps 4-6 above.
11. Press Menu to display the subnet mask:
12. Press Enter to edit the subnet mask:
13. To change the value, repeat steps 4-6 above.
14. Press Menu to display the node address. This address is not
editable. The node address should equal the AXIS 700 serial number
found on the underside label of the unit.