Axis Communications 700 Life Jacket User Manual


 
AXIS 700
User’s Manual Section 2: Basic Installation
25
Using BOOTP
in UNIX
Follow these steps to download the Internet address using the
BOOTP method:
1. Append the following entry to your boot table. This is typically
performed by editing the file
/etc/bootptab
.
where:
Example:
2. If necessary, update your host table and alias name databases as
required by your system.
3. Start the BOOTP daemon, if it is not already running. This is
typically performed using the command
bootpd -a
4. Restart the AXIS 700 to download the Internet address, default
router address and subnet mask. You can perform a restart remotely
via the AXIS 700 web interface. See “Specifying System Settings ”on
page 36.
<host name>:ht=<hardware type>:vm=<vendor magic>:\
:ha=<hardware address>:ip=<Internet address>:\
:sm=<subnet mask>:gw=<gateway field>
ht
ether
for Ethernet
vm rfc1048
ha
The Ethernet or node address, i.e. the AXIS 700 serial number
ip
The Internet address of the AXIS 700
sm
The subnet mask
gw
The default router address
spserv:ht=ether:vm=rfc1048:\
:ha=00408c24c01c:ip=172.16.253.80:\
:sm=255.255.0.0:gw=172.16.253.254