Filter
Top Products
:
AXIS 700 User’s Manual
56
Push Button
Follow these steps to restore the default settings using the Push
button:
1. Turn off the AXIS 700.
2. Press and hold the Push button while you switch on the AXIS 700.
Keep the Push button pressed until the Status, Busy and Network
indicators flash at regular two second intervals.
3. Release the Push button and wait at least two seconds (one flash of
the indicators).
4. Press and hold the Push button for at least five seconds until the
Network indicator remains constantly lit.
5. The AXIS 700 is now reset to factory default settings.
6. Restart the AXIS 700 by turning it off and then back on again.
Web Browser
Follow these steps to reset to the defaults settings from a Web browser:
1. Start the Web browser.
2. Enter the name or the Internet address of the AXIS 700 in the
location/address field. The AXIS 700 Home Page is displayed.
3. Click Administration.
4. Click This AXIS 700.
5. Click Factory Defaults.
The AXIS 700 will now restart with the factory default settings.
Push button