Filter
Top Products
AXIS 700
User’s Manual Section 2: Basic Installation
19
15. Press Menu once more to display the final instructions:
16. Press Enter to exit the IP settings. The AXIS 700 then
completes the startup sequence.
17. Note the name or Internet address of the AXIS 700 on the
instruction label and attach it to the top cover.
When the Status indicator stops flashing and remains off, the AXIS
700 is ready for use.
Note:
Should you make a mistake while editing the parameters, press
Cancel to cancel the previous operation.
Verifying the
Network Settings
To verify the network settings, you can access the Advanced menu
from the AXIS 700 control panel.
1. Press Menu a few times, until you to reach the Advanced
menu.
2. Use to find the Network Settings option.
3. Press Enter to enter the submenus.
4. Use to scroll through the parameter settings.
Other Methods for
Downloading the
Internet Address
As an alternative to the AXIS 700 control panel, you can use one of
these methods for downloading the Internet address: DHCP, ARP,
RARP or BOOTP. All methods are enabled by default. If necessary,
you can disable the RARP, BOOTP and DHCP methods by editing
the configuration parameters.
The main characteristics of each of these methods are: