Filter
Top Products
Section 2: Basic Installation
AXIS 700 User’s Manual
22
Using DHCP
Follow these steps to use the DHCP method:
1. Edit or create a scope in the DHCP manager of the DHCP
daemon. For Windows NT servers, refer to the “Windows NT
Resource Kit” on how to do this. The entries made in this scope
typically include the following parameters:
• Range of Internet addresses
•Subnet mask
• Default router Internet address
• Lease duration
• Mail server Internet address
• DNS server Internet address
• Domain name
• NTP server Internet address
2. Activate the scope.
In the AXIS 700 configuration file, DHCP is enabled by default. The
Internet address and all the other settings will be downloaded
automatically. You do not need to restart the AXIS 700.
Using ARP in
Windows
In Windows 95 and Windows NT, you can download the Internet
address using ARP. Perform the following commands to download the
Internet address and verify the communication.
From the DOS prompt,
type the following:
The
Ethernet address
equals the serial number of the AXIS 700
with each pair of digits separated by a hyphen.
Example:
arp -s <Internet address> <Ethernet address>
ping <Internet address>
arp -s 172.16.253.80 00-40-8c-11-00-86
ping 172.16.253.80