Filter
Top Products
Fabric OS Administrator’s Guide 101
53-1002745-02
Power management
3
Using switchCfgPersistentDisable
Entering switchCfgPersistentDisable with no arguments disables the switch immediately.
Example of using switchCfgPersistentDisable command output without arguments
switch:admin> switchCfgPersistentDisable
Switch's persistent state set to 'disabled'
Using switchCfgPersistentDisable - -disable
Using the --disable argument disables the switch immediately. This is the same as entering
switchCfgPersistentDisable without any arguments.
Example of using switchCfgPersistentDisable command output from admin login
switch:admin> switchCfgPersistentDisable --disable
Switch's persistent state set to 'disabled'
Switch persistent disable set
Using switchCfgPersistentDisable - -setDisableState
Using the - -setDisableState argument sets the status of the switch to ‘disabled’.
Example of using switchCfgPersistentDisable command output from admin login
switch:admin> switchCfgPersistentDisable --setdisablestate
Switch's persistent state set to 'disabled'
Switch persistent disable set
Using switchCfgPersistentDisable --help
Using the -- help argument displays a list of the available command arguments.
Example of using switchCfgPersistentDisable command output from admin login
switch:admin> switchCfgPersistentDisable --help
switchCfgPersistentDisable usage:
switchCfgPersistentDisable:
Disables the switch immediately.
switchCfgPersistentDisable --disable:
Disables the switch immediately.
switchCfgPersistentDisable --setdisablestate:
sets the status of the switch to ’disabled’.
switchCfgPersistentDisable --help:
Displays the command usage.
Power management
All blades are powered on by default when the switch chassis is powered on. Blades cannot be
powered off when POST or AP initialization is in progress.
To manage power and ensure that more critical components are the least affected by power
changes, you can specify the order in which the components are powered off, using the
powerOffListSet command.