Filter
Top Products
610 Fabric OS Administrator’s Guide
53-1002745-02
Displaying the range of output ports connected to xlate domains
24
1. Log in to a switch in the edge fabric.
2. Enter the lsDbShow command on the edge fabric.
In the lsDbShow output, ports in the range from 129 through 255 are the output ports on the
front domain.
The following example shows the range of output ports.
linkCnt = 2, flags = 0x0
LinkId = 53, out port = 1, rem port = 35, cost = 500, costCnt = 0, type = 1
LinkId = 57, out port = 129, rem port = 18, cost = 500, costCnt = 0, type = 1
The following example also shows the use of the lsDbShow display on the edge fabric. The front
domain, domain 3, has two links representing two EX_Port connections with output ports 129
and 132.
Domain = 3, Link State Database Entry pointer = 0x100bbcc0
………
linkCnt = 4, flags = 0x0
LinkId = 199, out port = 129, rem port = 2, cost = 10000, costCnt = 0, type = 1
LinkId = 199, out port = 132, rem port = 3, cost = 10000, costCnt = 0, type = 1
LinkId = 2, out port = 1, rem port = 2, cost = 10000, costCnt = 0, type = 1
LinkId = 1, out port = 32, rem port = 2, cost = 10000, costCnt = 0, type = 1