Filter
Top Products
VLAN Management
Voice and Media
Cisco Small Business SG200 Series 8-port Smart Switch 113
5
• Media VLAN
• Auto VoIP Sessions
Displaying and Adding Telephony OUI
The Telepho ny OUI page lists the Organizationally Unique Identifiers (OUIs)
associated with different voice VLANs.
To display this page, click VLAN Management > Voice and Media > Telephony
OUI in the navigation window.
The Telephony OUI Table is preconfigured with identifiers for commonly used
telephony devices. The administrator can add or remove OUIs. When Voice and
Media is enabled, ports use the OUI digits in the source and/or destination MAC
addresses of incoming packets to automatically assign voice traffic to a voice
VLAN. See Configuring OUI Based Voice and Media for instructions on
associating the VLAN with an IEEE 802.1p priority and enabling ports for Voice and
Media.
To add a new OUI description:
STEP 1 Click Add.
STEP 2 Specify the following values:
• Telephony OUI—Enter a 3-octet identifier for the telephony application.
• Description—Enter a description of the service such as the vendor name or
telephony product.
STEP 3 Click Apply and Close.
Configuring OUI Based Voice and Media
You can use the Telephony OUI Based Auto VoIP page to:
• Configure an IEEE 802.1p priority level for Voice and Media traffic identified
using the OUI digits in MAC addresses.
• Specify the VLAN for OUI-based VoIP packets. Although you can assign a
VLAN ID that has not yet been created on the switch, you must
subsequently create the VLAN for the feature to be operational (see
Creating VLANs).