Filter
Top Products
Viewing Statistics
System Summary
Cisco Small Business SG200 Series 8-port Smart Switch 19
2
• System Contact—Name of a contact person. Click Edit to display the
System Settings page and enter this value. (The characters ', ", %, and ? are
not supported.)
• Hostname—Name of the switch. Click Edit to display the System Settings
page and enter this value. By default, the switch hostname is composed of
the word switch concatenated with the three least significant bytes of the
switch MAC address (the six furthest right hexadecimal digits).
• System Object ID—The base object ID for the system’s management
information base (MIB).
• System Uptime—Time that has elapsed since the last reboot.
• Current Time—Current system time.
• Base MAC Address—Switch MAC address.
Hardware and Firmware Version Information
The following hardware and software information displays for the switch:
• Serial Number—Serial number of the switch.
• PID VID—Part number and version ID.
• Boot Version—Version of the boot code.
• Maximum Available Power (W)—(PoE switches only) Maximum available
power that can be delivered by the PoE ports.
• Threshold Power—(PoE switches only) The amount of power that must be
available for delivery in order for the port to be powered up.
• Consumed Power—(PoE switches only) Power currently being delivered to
the PoE devices connected to the switch.
• Firmware Version—Firmware version number of the active image.
• Firmware MD5 Checksum—MD5 checksum of the active image.
• Boot MD5 Checksum—MD5 checksum of the boot code.
You can view settings for each switch port. To display the Port Settings page, click
the port.