Filter
Top Products
Viewing Statistics
Interface Statistics
Cisco Small Business SG200 Series 8-port Smart Switch 22
2
Interface Statistics
Use the Interface page to display statistics for received and transmitted packets.
To display this page, click Status and Statistics > Interface in the navigation
window, or click Port Statistics under Device Status on the Getting Started
page.
Select the interface (Port or LAG) for which you want to display statistics, then
select a refresh rate for the statistics. The following information displays for the
selected interface:
• Total Bytes (Octets)—Total number of octets transmitted or received on the
selected interface since the switch was last refreshed.
• Unicast Packets—Total number of unicast packets transmitted or received
on the selected interface since the switch was last refreshed.
• Multicast Packets—Total number of multicast packets transmitted or
received on the selected interface since the switch was last refreshed.
• Broadcast Packets—Total number of broadcast packets transmitted or
received on the selected interface since the switch was last refreshed.
• Packets with Errors—Total number of packets with errors received on the
selected interface since the switch was last refreshed.
• STP BPDUs—Total number of Spanning Tree Protocol (STP) Bridge Protocol
Data Units (BPDUs) transmitted or received on the selected interface since
the switch was last refreshed.
• RSTP BPDUs—Total number of Rapid Spanning Tree Protocol BPDUs
transmitted or received on the selected interface since the switch was last
refreshed.
To clear statistics counters:
Click Clear Interface Counters to reset all counters to 0 for the selected
interface.
Click Clear All Interface Counters to reset all counters to 0 for all
interfaces.