Filter
Top Products
Viewing Statistics
System Summary
Cisco Small Business SG200 Series 8-port Smart Switch 20
2
Language Pack Table
This table displays information about the languages available on the switch. A
language can be selected by the administrator when logging into the configuration
utility.
English is the default language and it is built into the software. You can use the
Upgrade/Backup Firmware/Language page to download additional language
packs. Language files are available from the Cisco firmware download page.
The Language Pack Table displays the following information for each available
language:
• Language—Language name.
• Locale—Internet Engineering Task Force (IETF) locale code that identifies
the language and the country or region.
• Version—Language file version.
• MD5 Checksum—128-bit hash code used to check file integrity.
• File Size—The file size in KB.
• File Type—Indicates one of the following values:
- Built-In—Default language provided within the software and therefore
cannot be downloaded as a separate file.
- External—A language file that has been downloaded to the switch and
can be selected at login.
• Default—Displays Yes to indicate that the web-based switch configuration
utility login page will display in this language whenever the switch is
rebooted.
• Status—Displays Active or Inactive. At log-in, the user can choose a
language. The selected language is the Active language.
• Number of Users—The number of management users currently logged in
and using this language.
TCP and UDP Services
This table lists the information for each service that uses TCP or UDP:
• Service Name—The commonly–used name of the service, if available, such
as HTTP.
• Type—The transport protocol used for this service (TCP or UDP).