Filter
Top Products
Administration
Enabling Bonjour
Cisco Small Business SG200 Series 8-port Smart Switch 80
3
To clear the current configuration for a session, select the session and click Edit.
Then select Enable for Reset Session field.
CPU/Memory Utilization
Use the CPU/Memory Utilization page to monitor CPU and memory usage. To
display this page, click Administration > Diagnostics > CPU/Memory Utilization
in the navigation window.
The page displays the following data:
• Refresh Rate—Specify that the page refresh with the latest data every 15,
30, or 60 seconds, or leave the default as No Refresh.
• CPU Utilization Report—The utilization percentage for 5 second, 1 minute,
and 5 minute intervals.
• Memory Utilization Report—The following data is reported:
- Allocated Memory—Amount of memory available to the operating
system (OS).
- Free Memory—Amount of memory available to the OS that is currently
free.
- Total Memory—Total system memory, which includes the Allocated
Memory, plus free memory, plus memory reserved for use by code and
data sections of the software image.
Enabling Bonjour
Bonjour enables the switch and the services enabled by the administrator to be
discovered by using multicast DNS (mDNS). (Use the Administration >
Management Services page to enable or disable the switch services.) Bonjour
advertises switch services to the network and answers queries for the service
types it supports, simplifying network configuration in small business
environments.
Bonjour is enabled by default and runs on the management VLAN. Bonjour
Discovery can only be enabled globally, not on a per-port or per- VLAN basis.
The switch advertises the following service types: