Filter
Top Products
Viewing Statistics
Logs
Cisco Small Business SG200 Series 8-port Smart Switch 31
2
The Version 1 log is the current or most recently created log file, the Version 2 log
is the next most recent, and the Version 3 log is the oldest file. When a new log file
of the specified type is created, the Version 3 log is deleted and the Version 1 and
Version 2 logs are renamed to Version 2 and Version 3, respectively.
When a different version and log is selected, the new log automatically displays in
the Flash Memory Log Table. (When the table contains the maximum number of
entries, this page might take up to 45 seconds to display.)
The Flash Memory Log Table contains the following fields:
• Log Index—Numeric ID for the log entry.
• Log Time—Time that the log was created in the Flash Memory Table.
• Severity—The log severity can be one of the following:
- Alert (1)—Action must be taken immediately.
- Critical (2)—Critical conditions.
- Error (3)—Error conditions.
- Warning (4)—Warning conditions.
- Notice (5)—Normal but significant conditions.
- Informational (6)—Informational messages.
- Debug (7)—Provides detailed information about an event.
You can use the Log Settings page to select the severity levels that are
recorded in the log.
• Component—Software component that produced the log entry.
• Description—The log description.
Click Clear Logs to remove all log entries from flash memory.
Click Backup Logs to open the Download/Backup Configuration/Log page,
where you can use TFTP or HTTP to back up the log files to a TFTP server or
network location. For more information, see Backing Up the Configuration File
and Logs.